Aqua Glaze Glazing Compound

Description

Application Instructions

• Surfaces and air temperature should be above 40ºF.
• Prime unpainted wood.
• Make sure that surfaces are clean, dry, frost free and free of sandpaper dust.
• All old flaking paint and dried putty should be thoroughly removed for proper adhesion.
• Countersink nails at least 3/16”, fill and prime.
• Steel sash and other surfaces that rust must be primed with a rust preventing primer.
• Knead Aqua Glaze in hands and roll to warm for smoother application.
• Apply to surface with putty knife or spread firmly with fingers.
• Aqua Glaze can be painted in 30 minutes (with proper conditions) with water base or conventional oil based paints.
• Cleanup with water.

Typical Properties

• Consistency: Knife grade mastic
• Non-volatile: 85%
• Binder: Acrylic Latex
• Color: White
• Weight per Gallon: 16 lbs
• Surface Dry: 30 minutes

Technical Information

SDS – Sutherland Welles Ltd.^® Aqua Glaze Water Base Glazing Compound

TDS – MASTER SHEET Sutherland Welles Ltd.^® Aqua Glaze Water Base Glazing Compound

Retail Options for Individual & Case Units

• Atlas Preservation (CT based)
• Wholesale Glass Supply (CA based)
• Hubbard Paint (Cape Cod Region, MA)
• Integrity Supply (Cases Only)
• John Boyle Decorating Centers (CT)
• The Paint Shoppes (Providence, RI)
• Duval Paint & Decorating, Inc. (Jacksonville, FL)
• Order through your local Sherwin Williams

Distributed by these suppliers to various Retail Locations

• ALLPRO Member Retailers (Call stores for availability)
• Lancaster Paint
• PACOA
• Florida Hardware